skim through

Benefit
Accurate and reliable data analysis enables real-time alarms
The installation position is flexible and can be mounted on the side or above the carriageway
There is no need to install it on the road surface
Alarms as well as visualization of vehicle and system information
The user interface is friendly and the remote maintenance is convenient
Tailored monitoring ranges and customizable limits
Lane detection with efficient vehicle positioning
peculiarity
Browser-based user interface
The analysis software is intuitive to operate
Output values: timestamp, lane information, vehicle height, system status
Mobile radio interface for wireless data transmission
Digital inputs/outputs for triggering cameras or display panels

advantage

Reliable, compact height inspection solution

The Overheight Detection System reliably detects vehicle height in all weather conditions: an alarm is issued when the permissible height is exceeded, protecting infrastructure such as parking building entrances, tunnels or bridges. It also supports a high degree of identification of the loading process of the ferry. The system, which is flexibly adapted to the location of use, allows for quick and easy operation and operation.

The system is easy to install, commission, and maintain, allowing for a high degree of control at low cost but high efficiency, avoiding damage and accidents

Used in communication line and advanced ingress monitoring

The system prevents over-height vehicles from entering in front of the lower parking entrance.

The system also supports the loading process on the port site and can guide vehicles according to height.

Thanks to a wide range of mounting options, there is no need for installation on the road surface and a high degree of position flexibility is achieved

Gantry crane positioned vertically above the lane for multi-trajectory monitoring: trajectory assignment and height measurement

Perpendicular to the side of the pole in the lane: Assignable trajectory and measurement height

Horizontal with lane side: Tracks can be assigned and vehicles can be tracked

Feature-rich to check vehicle height on demand

Depending on the system setup, it is versatile to adjust the monitoring area to the geometry of the trajectory as well as to assign the trajectory, measure the height or track the vehicle.

Configure the monitoring area and alarm height

Detects and outputs trajectory information, timestamps, and vehicle height or system status of overheight vehicles

Using only one sensor, the vehicle height can be measured and up to three different alarm heights can be defined

Multiple alarm output options for easy operation

Alerts are output through several interfaces (TCP/IP, digital I/O, email, SMS, MQTT) and mobile radio interfaces; Efficiently combine digital inputs and outputs with cameras and display panels

With intuitive browser-based analysis software, the system operates and visualizes alerts