Our specialized industrial mixing specialists/engineers can design a ROBIN mixer to meet your specific process requirements in accordance with ATEX certification standards.Through the use of Computational Fluid Dynamics (CFD) simulation tools, ROBIN mixers are designed to ensure superior performance and long-term economic benefits.

You will benefit from Mittonroe's global performance experience and background in high value-added projects.

Vantage

A5 Series
For use in open tanks

• Mixing speed: 10 to 500 rpm
• Rated power: approx. 0.55 to 500kw
• Impeller diameter: 0.20 to 6 meters
• Impeller type: all
• Contact material: all machinable metals
• Pressure use: Atmospheric pressure
• Temperatures up to 500°C (932°F)
• Pressure from vacuum to 300 bar (gauge)
• Viscosity up to 1000Pas

Series B5
Suitable for applications where a gas-tight seal is required to avoid direct contact between the product and the atmosphere (stirring at pressures of several MPa, under vacuum, where the product is hazardous, when the product must be kept under inert gas)

• Rated power approx. 0.55 to 37 kW
• Speed: 500 to 10 rpm
• Impeller diameter: 0.20 to 6m
• Impeller type: all
• Contact material: Machinable metal materials
• Air pressure: ~ several MPa

E5 Series
For mixing in open tanks at atmospheric pressure

• Rated power: approx. 0.75 to 250 kW
• Speed: 500 to 10rpm
• Impeller diameter: 0.50 to 6m
• Impeller type: all
• Contact material: all machinable metal materials
• Air pressure used: ~ a few MPa

F5 Series
We offer 4 models to match your project for a customized solution.

• Rated power: approx. 0.75 to 250kw
• Speed: 500 to 10rpm
• Impeller diameter: 0.25 to 6m
• Impeller types: all
• Contact material: all machinable metals
• Pneumatic pressure used: Full vacuum to approx. 75 Bg (250 Bg for magnetic drives)

Milton Roy stirring has developed and improved designs to cope with most chemical industry applications.

Hydrometallurgy.Hydrometallurgy is an application in which iron ore, aluminum, zinc, copper and specialty metals are reduced and biochemically sterilized through a chemical process.This process requires large volume tanks to achieve the desired chemical reaction.Mixers are critical and our Robin mixers can be custom designed for the required applications such as liquid suspension, homogenization, gas dispersion and heat transfer.

Fertilizer.Phosphoric acid is a fertilizer used primarily in agriculture.It is produced by mixing natural phosphates with sulfuric acid.This complex process requires a mixer for homogenization purposes, allowing the sulfuric acid to react with the phosphate in a tank.Milton Roy mixers can be adjusted to provide optimal mixing based on the fluid's acidity, viscosity, corrosiveness, and abrasiveness.Our Robin mixers are heat resistant and the impeller design ensures proper mixing throughout the tank.

Minerals.The processing of natural and synthetic minerals begins with the agitation of calcium carbonate particles in suspension in the tank. The complexity of the process lies in the thickening of the solids medium, which results in a pseudo-plastic or Bingham fluid, where a storage volume of 500m3 may be required for the fluid, which can be a huge challenge.mixing of the entire tank.In addition, the mixer can operate at low speeds to achieve the shear forces required for fluid flow.